To convert meters to points, multiply by 2834.645669. That factor is the whole relationship: both units measure length, so the conversion is a proportion with no offset and no substance-specific constant.
The DTP point: exactly 1/72 inch, the unit type size is set in. The SI base unit of length, defined by the distance light travels in 1/299,792,458 of a second.
The mil and the millimetre are not the same thing and are out by a factor of about forty. A mil is one thousandth of an inch — 0.0254 mm — and a spec sheet that quotes film thickness in mils means the small unit. British drawings write the same size as "thou". Two tables follow: rounded steps for quick lookup, and a set of real reference quantities converted into points, which is usually more useful than the bare number.
The formula
meters- The amount you are converting, in meters
2834.64566929- The exact number of points in one meter
points- The converted result
How it works, step by step
- Enter the value in meters.
- It is multiplied by 2834.64566929, the exact factor between the two units.
- The answer is shown in points, with the reverse conversion beneath it.
- Check the reference table if you want a figure of comparable size.
Worked examples
A door height: 2.03 m in points
A door height comes to about 2.03 m. Multiplying by the factor: 2.03 × 2834.65 = 5754.33 pt. Dividing the answer back by 2834.65 returns the figure you started with, which is the quickest way to check you have the factor the right way up.
A credit card’s long edge: 0.0856 m in points
A credit card’s long edge comes to about 0.0856 m. Multiplying by the factor: 0.0856 × 2834.65 = 242.646 pt. Dividing the answer back by 2834.65 returns the figure you started with, which is the quickest way to check you have the factor the right way up.
How to read your score
Frequently asked questions
How many points are in one meter?
Exactly 2834.64566929. Every figure on this page is that one number multiplied by your input, so the only rounding is at the display step.
What is the formula to convert meters to points?
points = meters × 2834.64566929. Reversed, meters = points ÷ 2834.64566929, which is the same as multiplying by 0.000352777777778.
Which is the bigger unit, the meter or the point?
The meter. One meter equals 2834.65 points.
What does this quantity actually measure?
Both units measure length. That is why a single factor is enough: there is no temperature offset and no material property involved, unlike conversions that cross between different quantities.
What is a meter?
The SI base unit of length, defined by the distance light travels in 1/299,792,458 of a second.
What is a point?
The DTP point: exactly 1/72 inch, the unit type size is set in.
Why does my answer differ from another converter?
Almost always because the other tool rounded the factor before multiplying. This page keeps full double precision through the calculation and rounds only for display, and it prints the factor it used so you can see where any difference came from.
Is there a quick way to do m to pt in my head?
Plenty of people do this in their head: multiply by 2800 instead of using the exact factor 2834.645669. At 100 that shortcut gives 280,000 points, off by 3465 points or about 1.22%. Fine for a rough estimate, not fine for anything you are cutting to size or dosing.
Meters to points reference tables
| Meters | Points |
|---|---|
| 0.5 m | 1417.32 pt |
| 1 m | 2834.65 pt |
| 2 m | 5669.29 pt |
| 3 m | 8503.94 pt |
| 5 m | 14,173.2 pt |
| 10 m | 28,346.5 pt |
| 20 m | 56,692.9 pt |
| 25 m | 70,866.1 pt |
| 50 m | 141,732 pt |
| 75 m | 212,598 pt |
| 100 m | 283,465 pt |
| 250 m | 708,661 pt |
| 500 m | 1.41732e+06 pt |
| 1000 m | 2.83465e+06 pt |
| 5000 m | 1.41732e+07 pt |
Exact factor: 1 meter = 2834.64566929 points.
| Quantity | m | pt |
|---|---|---|
| A credit card’s long edge | 0.0856 m | 242.6 pt |
| A door height | 2.032 m | 5760 pt |
| An Olympic pool | 50 m | 1.417e+05 pt |
| The Eiffel Tower | 330 m | 9.354e+05 pt |
| A marathon | 4.22e+04 m | 1.196e+08 pt |
| Earth’s diameter | 1.274e+07 m | 3.612e+10 pt |
Published reference values, converted with the same factor this page uses.