Acetone Solution Preparation

How many grams of acetone to weigh for any molarity and volume, with a full recipe table.

Mass to weigh out
Adjust the inputs

Your result updates live as you type.

To prepare a solution of acetone you need the grams, and grams is molarity × volume in litres × 58.08 g/mol. A litre of 1 M takes 58.08 g; 500 mL of 0.1 M takes 2.904 g; 250 mL of 0.01 M takes 145.2 mg. Enter the strength you want and the volume you want it in, and the calculator returns the mass to weigh together with the same figure in milligrams and as a percentage strength.

The figure comes from the formula. Acetone is 3 × 12.011 (C) + 6 × 1.008 (H) + 15.999 (O), which is 58.08 g/mol, taking standard atomic weights, and every page here computes that sum rather than quoting it. Carbon makes up the largest share of the mass: 3 of the 10 atoms in a formula unit are carbon, and they account for 36.033 g of the 58.08 g, or 62.04% by mass. The derivation table below breaks the whole molecule down element by element.

Order of operations matters more than precision here. Dissolve the solid in rather less than the final volume, then make up to the mark once it has all gone into solution and come back to room temperature — warm solutions read low when they cool. If the calculated mass is under about 20 mg, prepare ten times the strength and dilute it tenfold by pipette instead, because C₁V₁ = C₂V₂ carries less error than a marginal weighing.

Nail polish remover and the solvent that dissolves most plastics. Miscible with water in all proportions, which is unusual for a good organic solvent. At 58.08 g/mol it is heavier than 2 of the 21 organic compounds covered here, and that ranking matters more than it looks: ethanol has a molar mass of 46.069 g/mol, so a gram of it contains 26.1% more formula units than a gram of acetone. Weigh by mass and you are not weighing equal amounts of substance.

Two practical things move the result. Purity below 100% means the weighed mass overstates how much compound you have — at 98% assay, 1.1616 g of every 58.08 g is not the compound — and any water picked up from the air does the same. Both are systematic, so they shift every solution made from that jar in the same direction.

The formula

m = c × (V ÷ 1000) × 58.08
c
The molarity you want, in mol/L
V
The volume you want to make, in millilitres
58.08
The molar mass of acetone in g/mol, derived from its formula
m
The mass of acetone to weigh out, in grams

How it works, step by step

  1. Enter the molarity you want, in mol/L.
  2. Enter the volume you want to make, in millilitres.
  3. The two are multiplied together and by 58.08 g/mol.
  4. The result is the mass to weigh; dissolve it in part of the volume and then make up to the mark.

Worked examples

250 mL of 0.1 M acetone

Weigh 1.452 g. That is 0.1 M × 0.25 L × 58.08 g/mol, and it comes to 1452 mg if your balance is set to milligrams. Dissolve in about 175 mL first, then make up to 250 mL.

500 mL of 0.5 M acetone

Weigh 14.52 g. That is 0.5 M × 0.5 L × 58.08 g/mol, and it comes to 14,520 mg if your balance is set to milligrams. Dissolve in about 350 mL first, then make up to 500 mL.

1000 mL of 1 M acetone

Weigh 58.08 g. That is 1 M × 1 L × 58.08 g/mol, and it comes to 58,080 mg if your balance is set to milligrams. Dissolve in about 700 mL first, then make up to 1000 mL.

How to read your score

0–0NothingNothing to weigh.
0–0.05Below a sensible weighingUnder 50 mg. Weigh ten or a hundred times this and dilute; the balance error does not shrink with the sample.
0.05–10Weighable directlyFrom 50 mg to 10 g, which is where a two- or three-decimal balance gives better than 1% on the mass.
10–—Large batchMore than 10 g of acetone. Worth checking solubility and, for a solid that generates heat on dissolving, adding it in portions.

Frequently asked questions

What is the molar mass of acetone (C3H6O)?

It is 58.08 g/mol. That is the sum of the standard atomic weights of every atom in the formula: 3 × 12.011 (C) + 6 × 1.008 (H) + 15.999 (O). One mole of acetone therefore weighs 58.08 g, and a gram of it is 17.218 mmol.

What percentage of acetone is carbon?

62.04% by mass. Each formula unit contains 3 carbon atoms contributing 36.033 g of the 58.08 g total, so 100 g of acetone contains 62.04 g of carbon and a kilogram contains 620.4 g of it.

How much acetone do I need for 1 litre of 1 M solution?

58.08 g — the molar mass in grams, which is what a 1 molar solution means. For 1 L of 0.1 M it is 5.808 g, and for 1 L of 0.01 M it is 0.5808 g.

How much for 100 mL of 0.1 M?

0.5808 g. The volume is a tenth of a litre and the strength a tenth of molar, so the mass is a hundredth of 58.08 g. In milligrams that is 580.8 mg.

Do I dissolve the solid first or make up the volume first?

Dissolve first, in perhaps 70% of the final volume, then make up to the mark. Adding solid to a full flask overshoots the volume and leaves the solution weak, and undissolved solid at the mark means the strength keeps changing as it goes in.

Can I dilute a stock solution instead of weighing?

Yes, and it is more accurate for small amounts. C₁V₁ = C₂V₂: to get 500 mL of 0.01 M from a 0.5 M stock, take 10 mL of stock and make up to 500 mL. Weighing the 290.4 mg that 500 mL of 0.01 M needs directly is the harder of the two.

Solution recipes for acetone

How the molar mass of acetone is arrived at
ElementAtomsAtomic weightContribution (g/mol)By mass
Carbon (C)312.01136.03362.04%
Oxygen (O)115.99915.99927.55%
Hydrogen (H)61.0086.04810.41%
Total — one mole of acetone58.08100%

Standard atomic weights, IUPAC 2021. The contribution column is atoms × atomic weight, and the total is the molar mass this page uses: 58.08 g/mol.

Grams of acetone needed for a standard solution
Targetfor 100 mLfor 250 mLfor 500 mLfor 1 L
0.001 M5.808 mg14.52 mg29.04 mg58.08 mg
0.005 M29.04 mg72.6 mg145.2 mg290.4 mg
0.01 M58.08 mg145.2 mg290.4 mg580.8 mg
0.05 M290.4 mg726 mg1.452 g2.904 g
0.1 M580.8 mg1.452 g2.904 g5.808 g
0.15 M871.2 mg2.178 g4.356 g8.712 g
0.2 M1.1616 g2.904 g5.808 g11.616 g
0.25 M1.452 g3.63 g7.26 g14.52 g
0.5 M2.904 g7.26 g14.52 g29.04 g
1 M5.808 g14.52 g29.04 g58.08 g
2 M11.616 g29.04 g58.08 g116.16 g

Each cell is molarity × volume in litres × 58.08 g/mol. Dissolve the solid first and then make up to the marked volume — adding solid to a full volume overshoots it.

Acetone among other organic compounds, by molar mass
CompoundFormulaMolar mass (g/mol)Millimoles in 1 g
MethanolCH4O32.04231.209
EthanolC2H6O46.06921.707
Acetone (this page)C3H6O58.0817.218
UreaCH4N2O60.05616.651
Isopropyl alcoholC3H8O60.09616.64
Ethylene glycolC2H6O262.06816.111
GlycineC2H5NO275.06713.321

Ordered by molar mass. The last column is 1000/M, which is the number a weighed gram actually gives you.

Related calculators

Solution & Concentration Calculators

148 connected calculators built on the same model — each examines one specific angle. Showing 40 nearest this one; the collection page lists them all.