Formic acid Solution Preparation

How many grams of formic acid to weigh for any molarity and volume, with a full recipe table.

Mass to weigh out
Adjust the inputs

Your result updates live as you type.

To prepare a solution of formic acid you need the grams, and grams is molarity × volume in litres × 46.025 g/mol. A litre of 1 M takes 46.025 g; 500 mL of 0.1 M takes 2.3013 g; 250 mL of 0.01 M takes 115.06 mg. Enter the strength you want and the volume you want it in, and the calculator returns the mass to weigh together with the same figure in milligrams and as a percentage strength.

The figure comes from the formula. Formic acid is 12.011 (C) + 2 × 1.008 (H) + 2 × 15.999 (O), which is 46.025 g/mol, taking standard atomic weights, and every page here computes that sum rather than quoting it. Oxygen makes up the largest share of the mass: 2 of the 5 atoms in a formula unit are oxygen, and they account for 31.998 g of the 46.025 g, or 69.52% by mass. The derivation table below breaks the whole molecule down element by element.

Order of operations matters more than precision here. Dissolve the solid in rather less than the final volume, then make up to the mark once it has all gone into solution and come back to room temperature — warm solutions read low when they cool. If the calculated mass is under about 20 mg, prepare ten times the strength and dilute it tenfold by pipette instead, because C₁V₁ = C₂V₂ carries less error than a marginal weighing.

The simplest carboxylic acid, present in ant venom, used in leather tanning and as a preservative in silage. At 46.025 g/mol it is heavier than 1 of the 12 acids covered here, and that ranking matters more than it looks: hydrochloric acid has a molar mass of 36.458 g/mol, so a gram of it contains 26.2% more formula units than a gram of formic acid. Weigh by mass and you are not weighing equal amounts of substance.

One more step applies if you are starting from a concentrated bottle. Concentrated acids are labelled as a percentage by weight together with a density, not as a molarity, so getting to mol/L means multiplying density by that percentage and dividing by 46.025 g/mol. A page like this one gives you the last of those three numbers; the first two are on the bottle, and they vary between grades.

The formula

m = c × (V ÷ 1000) × 46.025
c
The molarity you want, in mol/L
V
The volume you want to make, in millilitres
46.025
The molar mass of formic acid in g/mol, derived from its formula
m
The mass of formic acid to weigh out, in grams

How it works, step by step

  1. Enter the molarity you want, in mol/L.
  2. Enter the volume you want to make, in millilitres.
  3. The two are multiplied together and by 46.025 g/mol.
  4. The result is the mass to weigh; dissolve it in part of the volume and then make up to the mark.

Worked examples

250 mL of 0.1 M formic acid

Weigh 1.15063 g. That is 0.1 M × 0.25 L × 46.025 g/mol, and it comes to 1150.62 mg if your balance is set to milligrams. Dissolve in about 175 mL first, then make up to 250 mL.

500 mL of 0.5 M formic acid

Weigh 11.5062 g. That is 0.5 M × 0.5 L × 46.025 g/mol, and it comes to 11,506.2 mg if your balance is set to milligrams. Dissolve in about 350 mL first, then make up to 500 mL.

1000 mL of 1 M formic acid

Weigh 46.025 g. That is 1 M × 1 L × 46.025 g/mol, and it comes to 46,025 mg if your balance is set to milligrams. Dissolve in about 700 mL first, then make up to 1000 mL.

How to read your score

0–0NothingNothing to weigh.
0–0.05Below a sensible weighingUnder 50 mg. Weigh ten or a hundred times this and dilute; the balance error does not shrink with the sample.
0.05–10Weighable directlyFrom 50 mg to 10 g, which is where a two- or three-decimal balance gives better than 1% on the mass.
10–—Large batchMore than 10 g of formic acid. Worth checking solubility and, for a solid that generates heat on dissolving, adding it in portions.

Frequently asked questions

What is the molar mass of formic acid (CH2O2)?

It is 46.025 g/mol. That is the sum of the standard atomic weights of every atom in the formula: 12.011 (C) + 2 × 1.008 (H) + 2 × 15.999 (O). One mole of formic acid therefore weighs 46.025 g, and a gram of it is 21.727 mmol.

What percentage of formic acid is oxygen?

69.52% by mass. Each formula unit contains 2 oxygen atoms contributing 31.998 g of the 46.025 g total, so 100 g of formic acid contains 69.52 g of oxygen and a kilogram contains 695.23 g of it.

How much formic acid do I need for 1 litre of 1 M solution?

46.025 g — the molar mass in grams, which is what a 1 molar solution means. For 1 L of 0.1 M it is 4.6025 g, and for 1 L of 0.01 M it is 0.46025 g.

How much for 100 mL of 0.1 M?

0.46025 g. The volume is a tenth of a litre and the strength a tenth of molar, so the mass is a hundredth of 46.025 g. In milligrams that is 460.25 mg.

Do I dissolve the solid first or make up the volume first?

Dissolve first, in perhaps 70% of the final volume, then make up to the mark. Adding solid to a full flask overshoots the volume and leaves the solution weak, and undissolved solid at the mark means the strength keeps changing as it goes in.

Can I dilute a stock solution instead of weighing?

Yes, and it is more accurate for small amounts. C₁V₁ = C₂V₂: to get 500 mL of 0.01 M from a 0.5 M stock, take 10 mL of stock and make up to 500 mL. Weighing the 230.12 mg that 500 mL of 0.01 M needs directly is the harder of the two.

Solution recipes for formic acid

How the molar mass of formic acid is arrived at
ElementAtomsAtomic weightContribution (g/mol)By mass
Oxygen (O)215.99931.99869.52%
Carbon (C)112.01112.01126.1%
Hydrogen (H)21.0082.0164.38%
Total — one mole of formic acid46.025100%

Standard atomic weights, IUPAC 2021. The contribution column is atoms × atomic weight, and the total is the molar mass this page uses: 46.025 g/mol.

Grams of formic acid needed for a standard solution
Targetfor 100 mLfor 250 mLfor 500 mLfor 1 L
0.001 M4.6025 mg11.5062 mg23.0125 mg46.025 mg
0.005 M23.0125 mg57.5312 mg115.062 mg230.125 mg
0.01 M46.025 mg115.062 mg230.125 mg460.25 mg
0.05 M230.125 mg575.312 mg1.15063 g2.30125 g
0.1 M460.25 mg1.15063 g2.30125 g4.6025 g
0.15 M690.375 mg1.72594 g3.45187 g6.90375 g
0.2 M920.5 mg2.30125 g4.6025 g9.205 g
0.25 M1.15063 g2.87656 g5.75312 g11.5062 g
0.5 M2.30125 g5.75312 g11.5062 g23.0125 g
1 M4.6025 g11.5062 g23.0125 g46.025 g
2 M9.205 g23.0125 g46.025 g92.05 g

Each cell is molarity × volume in litres × 46.025 g/mol. Dissolve the solid first and then make up to the marked volume — adding solid to a full volume overshoots it.

Formic acid among other acids, by molar mass
CompoundFormulaMolar mass (g/mol)Millimoles in 1 g
Hydrochloric acidHCl36.45827.429
Formic acid (this page)CH2O246.02521.727
Acetic acidCH3COOH60.05216.652
Boric acidH3BO361.83116.173
Nitric acidHNO363.01215.87
Oxalic acidC2H2O490.03411.107
Lactic acidC3H6O390.07811.101

Ordered by molar mass. The last column is 1000/M, which is the number a weighed gram actually gives you.

Related calculators

Solution & Concentration Calculators

148 connected calculators built on the same model — each examines one specific angle. Showing 40 nearest this one; the collection page lists them all.